STACK
Features
- Improved circuit design, better components and lower electrical noise!
- DJI HD VTX Connector (Plug-and-Play / No soldering required)
- FC indicator LEDs for visual debugging
Specifications
- MCU: STM32 F745
- Gyro: BMI270
- Barometer: DPS310
- OSD Chip: AT7456
- Flash: 8MB (Blackbox flash)
- UARTS: 6
- Motor outputs: 4x (SH1.0 connector)
- I2C serial: SDA/SLA pads
- Smartaudio / IRC Tramp VTX protocol supported
- LED controller: Yes
- Beeper pad: Yes
- Firmware target: IFRC-IFLIGHT_BLITZ_F722
- Mount pattern: 20×20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws
- Dimensions: 30.5×27 mm
- Weight: 5g
Wiring Suggestion
- UART 1 for VTX HD / Analog
- UART 2 for a Receiver
- UART 3/4/5 for GPS or other sensors that require a serial port
- UART 6 for ESC Telemetry
ESC
Specifications
- MOUNTING HOLES: 20*20MM/Φ4MM
- SUPPORTS 2-6S LIPO INPUT
- CONSTANT: 55 AMPS
- CURRENT SENSOR: YES
- CURRENT RATE: 100
- FIRMWARE: BLHELI 32
- TARGET: IFLIGHT_BLITZ_G2
- SUPPORTS: DSHOT DSHOT150/300/600/MULTISHOT/ ONESHOT ETC.
- BEC: NO
- BURST: 60 AMPS
- MCU: G071
- WEIGHT: 11.3G
- DIMENSION: 35*42MM
Packing List
- 1 x BLITZ Mini F7 V1.1 Flight Controller
- 1pc x BLITZ Mini E55 4-IN-1 2-6S ESC
- 1 x FC connectors
- 1 x Silicon grommets
Reviews
There are no reviews yet.