Bambu Lab A1/A1 Combo
- Multi-Color Printing , Full-auto Calibration
- Active Flow Rate Compensation, 1-Clip Quick Swap Nozzle
Multi-Color Printing
The all-new AMS lite is elegant and reliable, making
multi-color 3D printing accessible to everyone.
Active Flow Rate Compensation
The A1/A1 Combo revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.
Full Auto Calibration
The A1/A1 Combo handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.
Active Motor Noise Cancelling
The A1/A1 Combo can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.
Quick Swap Nozzle
All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.
Bed Slinger, with CoreXY Speed And Quality
Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes the features to print a 14-minute benchy with quality, following all the speed benchy rules straight out of the box without using specialized filaments.
A1/A1 Combo Technical Specifications
Build Volume(W*D*H) | 256*256*256 mm³ |
Hot End | All-Metal |
Nozzle | Stainless Steel |
Max Hot End Temperature | 300 °C |
Nozzle Diameter | 0.4 mm (Included), 0.2 mm, 0.6 mm, 0.8 mm |
Build Plate | Bambu Textured PEI Plate (Included), Bambu High Temperature Plate (Smooth PEI), Bambu Cool Plate |
Max Build Plate Temperature | 100°C |
Max Speed of Tool Head | 500mm/s |
Max Acceleration of Tool Head | 10m/s² |
Supported Filament | PLA, PETG, TPU, PVA, |
Chamber Monitoring Camera | Low Frame Rate Camera (Up to 1080P) Timelapse Supported |
Filament Run Out Sensor | Yes |
Filament Odometry | Yes |
Power Loss Recover | Yes |
Filament Tangle Sensor | Yes |
Not Recommended Filament | ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer |
Reviews
There are no reviews yet.